The 'Fork Lift' project

The 'Fork Lift' idea came about because I seem to 
always need to move something heavy that isn't sand,
gravel, or dirt.

Standing on a pallet

The parts; a collings axe cut in half and
welded to some square tubing with an
attachment made from 1/2" plate and more tubing

Another view. There are two bits of square tubing
to make it possible to change the range of movement

Left view of the assembly off the tractor.
The 1" pins that hold on the bucket will also
engage the square tubing adaptor.

Right view of the assembly off the tractor

Here is the finished (for now) product
with a pallet on the forks.